[1.4.7] CameraCraft Mod Download












The first thing you should craft on your journey through the world of CameraCraft is a Camera.

This will give you a normal camera, which works with films (see below).

To take a photo, open the camera inventory by performing a shift-right click with the camera in your hotbar. Then put a film in and close the inventory. Find a nice spot and do a right click to take the photo (You can also use the p-key on your keyboard for historical reasons. That key can be changed in the normal Minecraft Controls).

If you want to be a bit more fancy, you can try the digital camera, which works with a memory card instead of a film:

The Digital Camera has a few advantages over the normal camera:

  • You can view your photos on the camera, without printing them
  • You can delete photos from the memory card, which you don’t like
  • You can take 50 instead of only 36 photos

But the digital camera also needs Batteries:


If you want to take photos with a digital camera, you first need to craft batteries, which is done like so:

This will give you a Battery with a power of 1 volt. You can increase the voltage of a battery up to 9 volts by adding Redstone dust to it:

The above example will give you a 3 volts battery, which can then be turned into a 5 volts battery and so on.

Each volt of a battery means you can take 1 photo. In the digital camera you have a counter, how many photos you’ve left with the current battery (after that, the camera will take a new battery from the stack).

Memory Cards

Memory Cards are required for the Digital Camera. Craft them as follows:


There are 2 types of films, the colored film and the black and white film. You craft them like so:

Their function is to serve as storage for photos taken with the normal camera.

To view the photos, you first need to process the films with the Photo Processor:

Photo Processor

The photo processor is used to convert films that are filled with images into Processed films which can then be printed. To use the photo processor, put in a film with photos on it and a bucket of water (you can also put in lava or milk, but that won’t work )

Photo Station

The Photo Station is one of the most important blocks. It is used to print out your photos onto paper. To use it, you put in either a memory card or a processed film. Click on the button with a photo on it, to select the photos you want to print. A screen similar to the following will show up:

(https://www.9minecraft.net) Click this bar to view the full image.

The small button on the left (red cross / green tick on it) selects if you want the currently shown photo to be printed. On the right you can select how big your photo should be (maximum is 4×4 Blocks). Right beneath the “Print”-Button you can see how much paper your current selection will cost. Click the Print-Button to start printing.

The photo station also has a small inventory for paper and ink. Each photo will use up 1 yellow, 1 cyan and 1 magenta dye and 1 piece of paper for each block the photo covers (e.g.: A 3 by 4 photo will use up 12 paper). The printed photos are also added to the inventory. The photo station also looks for adjacent chests and uses their inventory as a possible paper and ink supply or a place to store finished photos.


Each photo has some properties that are stored with it:

  • It’s name which is chosen after you take it
  • The name of the player who took the photo (mainly for Multiplayer)
  • The location where the photo was taken.

To view these properties and the photo itself, just perform a right click with the photo in your hotbar. If you are the owner of that photo you can also rename it.

If you want to place a photo on the wall, you need to turn it into a poster:

When you right click a poster placed on a wall, the same screen will show up as if you had right clicked with the photo in your hotbar.

Both posters and photos can have a teleportation effect, which is achieved by combining them with an enderpearl in the crafting table. That will give them a glowing effect and when you right click with them, there will be a teleport button (enderpearl on it) that will teleport you to where the photo was taken.

In survival mode you need a so called “Teleportation Battery” to teleport using a teleportation photo. See below for more info.

When a teleportation photo is placed on the wall, you can “walk through” it.

Teleportation Battery

A teleportation battery is needed to teleport using a Teleportation photo. Each battery has 10 uses, and they can be stacked up to 16. Just place them anywhere in your inventory, like you would with arrows for bows.

Crafting Recipe:

Another option (especially for server owners) is to use a Teleportation Enabler:

It will allow people in survival mode in a range of 50 Blocks to teleport using photos like if they were in Creative. Note that you must turn its crafting recipe on in the configuration if you want to obtain this in survival mode (see below for more info on the configuration)


Tripods can be used to take photos of yourself or to create a timer. Craft it like so:

You can place cameras on it. When you power the tripod with redstone, the camera will take a photo.

Please note that this is still in development and might have bugs. Also you can’t open the inventory of the camera when it is placed. You need to pick it up. That will be changed later.

Photographic filters 

You may have noticed the additional slot in the camera inventory. You can put photographic filters there which will filter specific colors and let the photo look different.

Start with a transparent filter:

You can dye this transparent filter by adding yellow, blue, red or green dye to it. More filters are planned!

The mod is CameraCraft, and already noticing by the name, you know this has something to do with cameras. If you thought that, you are correct. This mod allows you to take pictures, film your buddies, and share ‘em.


  • Download and install Minecraft Forge
  • Find your .minecraft-Folder
  • Open the mods-Folder in .minecraft (if its not there, create it)
  • Download the CameraCraft zip-File (see Download-Section above) and put it in the mods-Folder. Do not unzip it!
  • Enjoy!

If you are running a Minecraft Server and want to install CameraCraft do the following (you don’t need to do this if you want to join a CameraCraft server. Look above for how to install CameraCraft into your Client).

  • Download and install Minecraft Forge into your server
  • Open the mods-Folder in your server-directory (if its not there, create it)
  • Download the CameraCraft zip-File (see Download-Section above) and put it in the mods-Folder. Do not unzip it!
  • Enjoy!


1 Comment


Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Lost Password